| Age | Commit message (Collapse) | Author |
|---|
|
The implementations generated a string with an internal null terminator; this
went unnoticed since unit test string verification did not perform string
equality check properly (it compared XPath string result as a C-string, thus
stopping at the first null terminator).
Fixes #36.
|
|
This prevents malformed input XML with very deeply recursive DOCTYPE sections
from crashing the parser.
Fixes #29.
|
|
Also fix the float/double member order in the header file.
|
|
|
|
Make float/double round-trip
This change also adds xml_text::set and xml_attribute::set_value overloads for float so that float is only printed using just enough digits to represent float, instead of enough digits to represent double.
|
|
|
|
|
|
It's sufficient to define PUGIXML_HEADER_ONLY anywhere now, source is included
automatically.
This is a second attempt; this time it includes a workaround for QMake bug
that caused it to generate incorrect Makefile.
|
|
Make float/double round-trip
|
|
Unfortunately, standard headers on MinGW32 insist on undefining off64_t
and _wfopen extensions if __STRICT_ANSI__ is true (e.g. C++11 mode). This
leads to compilation errors since b7a1fec started to use _wfopen in strict
mode. That change erroneously checked GCC version - however, the version
itself is irrelevant; the actual criteria is whether mingw64 runtime is
used.
off64_t is not useful on MinGW32 since we only need it to open large files
on 64-bit platforms; unfortunately, the lack of _wfopen means we won't be
able to support wide-char paths on Windows for MinGW32.
Fixes #24.
|
|
Since MinGW 4.5 does not define these functions if __STRICT_ANSI__ is defined
(in case of _wfopen it defines it inconsistently between stdio.h and wchar.h)
use the baseline functions for MinGW 4.5 and earlier.
Fixes #23.
|
|
node_copy_string relied on the fact that target node had an empty name and
value. Normally this is a safe assumption (and a good one to make since it
makes copying faster), however it was not checked and there was one case when
it did not hold.
Since we're reusing the logic for inserting nodes, newly inserted declaration
nodes had the name set automatically to xml, which in our case violates the
assumption and is counter-productive since we'll override the name right after
setting it.
For now the best solution is to do the same insertion manually - that results
in some code duplication that we can refactor later (same logic is partially
shared by _move variants anyway so on a level duplicating is not that bad).
|
|
Add allow_insert_attribute (similar to allow_insert_child).
|
|
Remove redundant this-> from type() call (argument used to be called type,
but it's now type_).
Use _root member directly when possible instead of calling internal_object.
|
|
This will allow us to implement nodeset_eval_last evaluation mode if necessary
without relying on a fragile boolean argument.
|
|
Extract end of string to rend and add comments to translate_table.
|
|
Right now remove_node is only used in contexts where parent is reset after
removing but this might be important in the future.
|
|
Since depth is unsigned this is actually well-defined but it's better to not
have the underflow anyway.
|
|
|
|
This is more for consistency with the surrounding code than for performance.
|
|
|
|
This should completely eliminate the confusion between load and load_file.
Of course, for compatibility reasons we have to preserve the old variant -
it will be deprecated in a future version and subsequently removed.
|
|
Previously push_back implementation was too big to inline; now the common case
(no realloc) is small and realloc variant is explicitly marked as no-inline.
This is similar to xml_allocator::allocate_memory/allocate_memory_oob and
makes some XPath queries 5% faster.
|
|
In some cases constant overhead on step evaluation is important - i.e. for
queries that evaluate a simple step in a predicate expression. Eliminating
a redundant function call thus can prove worthwhile.
This change makes some queries (e.g. //*[not(*)]) 4% faster.
|
|
Previously setting a large page size (i.e. 1M) would cause dynamic string
allocation to assert spuriously. A page size of 64K guarantees that all
offsets fit into 16 bits.
|
|
Computed offsets for documents with nodes that were added using append_buffer
or newly appended nodes without name/value information were invalid.
|
|
This reduces the number of unsafe pointer manipulations.
|
|
These used to result in better codegen for unknown reasons, but this is no
longer the case.
|
|
Split number/boolean filtering logic into two functions. This creates an
extra copy of a remove_if-like algorithm, but moves the type check out of
the loop and results in better organized filtering code.
Consolidate test-based dispatch into apply_predicate (which is now a member
function).
|
|
Calling memcpy(x, 0, 0) is technically undefined (although it should usually
be a no-op).
|
|
Calling memcpy(x, 0, 0) is technically undefined (although it should usually
be a no-op).
Fixes #20.
|
|
|
|
This lets us do fewer null pointer checks (making printing 2% faster with -O3)
and removes a lot of function calls (making printing 20% faster with -O0).
|
|
To get more benefits from constant predicate/filter optimization we rewrite
[position()=expr] predicates into [expr] for numeric expressions. Right now
the rewrite is only for entire expressions - it may be beneficial to split
complex expressions like [position()=constant and expr] into [constant][expr]
but that is more complicated.
last() does not depend on the node set contents so is "constant" as far as
our optimization is concerned so we can evaluate it once.
|
|
Numeric and boolean constant expressions in filters are different in that
to evaluate numeric expressions we need a sorted order, but to evaluate
boolean expressions we don't. The previously implemented optimization adds
an extra sorting step for constant boolean filters that will be more expensive
than redundant computations.
Since constant booleans are sort of an edge case, don't do this optimization.
This allows us to simplify apply_predicate_const to only handle numbers.
|
|
Now expression is always _right for filter/predicate nodes to make optimize()
simpler. Additionally we now use predicate metadata to make is_posinv_step()
faster.
This introduces a weak ordering dependency in rewrite rules to optimize() -
classification has to be performed before other optimizations.
|
|
If a filter/predicate expression is a constant, we don't need to evaluate it
for every nodeset element - we can evaluate it once and pick the right element
or keep/discard the entire collection.
If the expression is 1, we can early out on first node when evaluating the
node set - queries like following::item[1] are now significantly faster.
Additionally this change refactors filters/predicates to have additional
metadata describing the expression type in _test field that is filled during
optimization.
Note that predicate_constant selection right now is very simple (but captures
most common use cases except for maybe [last()]).
|
|
A page can fail to allocate during attribute creation; this case was not
previously handled.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1080 99668b35-9821-0410-8761-19e4c4f06640
|
|
When removing a node or attribute, we know that the parent has at least one
node/attribute so a null pointer check is redundant.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1078 99668b35-9821-0410-8761-19e4c4f06640
|
|
If the requested evaluation mode is not _all, we can use this mode for the
last predicate/filter expression and exit early.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1073 99668b35-9821-0410-8761-19e4c4f06640
|
|
Using pointers instead of node/attribute objects allows us to use knowledge
about the tree to guarantee that pointers are not null. This results in
less null checks (10-20% speedup with optimizations enabled) and less
function calls (5x speedup with optimizations disabled).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1072 99668b35-9821-0410-8761-19e4c4f06640
|
|
Some steps relied on step_push rejecting null inputs; this is no longer
the case. Additionally stepping now more rigorously filters null inputs.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1069 99668b35-9821-0410-8761-19e4c4f06640
|
|
Sometimes when evaluating the node set we don't need the entire set and
only need the first element in docorder or any element. In the absence of
iterator support we can still use this information to short-circuit
traversals.
This does not have any effect on straightforward node collection queries,
but frequently improves performance of complex queries with predicates
etc. XMark benchmark gets 15x faster with some queries enjoying 100x
speedup on 10 Mb dataset due to a significant complexity improvement.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1067 99668b35-9821-0410-8761-19e4c4f06640
|
|
select_node is shorter and mistyping nodes as node or vice versa should
not lead to any issues since return types are substantially different.
select_single_node method still works and will be deprecated with an
attribute and removed at some point.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1065 99668b35-9821-0410-8761-19e4c4f06640
|
|
This method is equivalent to xml_node::select_single_node. This makes
select_single_node faster in certain cases by avoiding an allocation and -
more importantly - paves the way for future step optimizations.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1064 99668b35-9821-0410-8761-19e4c4f06640
|
|
Use descendant-or-self::node() transformation for self, descendant and
descendant-or-self axis. Self axis should be semi-frequent; descendant
axes should not really be used with // but if they ever are the complexity
of the step becomes quadratic so it's better to optimize this if possible.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1063 99668b35-9821-0410-8761-19e4c4f06640
|
|
When looking for an attribute by name, finding the first attribute means
we can stop looking since attribute names are unique. This makes some
queries faster by 40%.
Another very common pattern in XPath queries is finding an attribute with
a specified value using a predicate (@name = 'value'). While we perform an
optimal amount of traversal in that case, there is a substantial overhead
with evaluating the nodes, saving and restoring the stack state, pushing
the attribute node into a set, etc. Detecting this pattern allows us to
use optimized code, resulting in up to 2x speedup for some queries.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1061 99668b35-9821-0410-8761-19e4c4f06640
|
|
The actual condition for the optimization is invariance from context list
-- this includes both position() and last().
Instead of splitting the posinv concept just include last() into
non-posinv expressions - this requires sorting for boolean predicates that
depend on last() and do not depend on position(). These cases should be
very rare.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1060 99668b35-9821-0410-8761-19e4c4f06640
|
|
Comment value can not contain the string "--" or end with "-". Since
comments do not support escaping, we're handling this by adding an extra
space after the first "-". A string of "-" thus turns into "- - - ...".
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1058 99668b35-9821-0410-8761-19e4c4f06640
|
|
Make sure their order is consistent with the order of declaration in
header file.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1057 99668b35-9821-0410-8761-19e4c4f06640
|
