| Age | Commit message (Collapse) | Author |
|---|
|
When xpath_string is heap-allocated we always know the length of the
string at some point - it is now stored in the object. This reduces
redundant string length calculations and makes string_value() much faster
in case it has to concatenate strings.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1053 99668b35-9821-0410-8761-19e4c4f06640
|
|
translate() with constant arguments now uses a 128-byte table and a table
lookup instead of searching characters in the source string. The table is
generated during query optimization.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1052 99668b35-9821-0410-8761-19e4c4f06640
|
|
Node ancestor search now terminates early if ancestor is found before the
document root (only happens if nodes were at the same depth).
Sibling search now steps synchronously for left and right nodes to avoid
worst-case performance when we go in the wrong direction and have to scan
a big list (this comes at the cost of average performance since in the
best case we do 2x more operations).
Node comparison is now done using node pointers to elide some null
comparisons since the structure of the search guarantees that they are
handled properly.
All of the above results in ~2x faster document order comparison on
complex documents.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1050 99668b35-9821-0410-8761-19e4c4f06640
|
|
XPath evaluation frequently produces sequences that are sorted but are not
tagged as such (area for improvement...). Doing a linear scan before
sorting is cheap and results in tremendous speedup for already sorted
sequences (especially if document_buffer_order optimization does not
apply).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1049 99668b35-9821-0410-8761-19e4c4f06640
|
|
While gcc and clang can eliminate dependency on s in the inner loop of
PUGI__SCANWHILE_UNROLL, MSVC emits a series of register increments.
Rewriting the code to explicitly remove the dependency keeps similar
codegen on gcc/clang but improves codegen on MSVC for a 10% performance
boost.
Also use unrolled scanning in text_output_escaped (2% faster).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1048 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1047 99668b35-9821-0410-8761-19e4c4f06640
|
|
The page no longer contains 'data' field to use sizeof everywhere instead
of offsetof/sizeof inconsistency (that is required because some compilers
don't recognize offsetof as compile-time constant).
The page no longer contains 'memory' field that is now encoded as an
offset byte before the page - this allows us to save one pointer from the
static page in the document to keep the size the same as in v1.2 (binary
compatibility).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1046 99668b35-9821-0410-8761-19e4c4f06640
|
|
Use the same flag that is used for marking name/value in nodes/attributes
as shared. This reduces document structure size and makes some amount of
sense (although admittedly is a bit of a hack).
We need to bring document _memory size back down to 192 bytes and this is
the first step.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1045 99668b35-9821-0410-8761-19e4c4f06640
|
|
xml_node objects carry an overhead since they perform NULL checks - in
case of copying a hierarchy we know that we only traverse valid nodes so
we don't need to do this. This makes copyless copy 16% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1043 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1042 99668b35-9821-0410-8761-19e4c4f06640
|
|
Also remove accidentally committed pragma pack :-/
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1041 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1037 99668b35-9821-0410-8761-19e4c4f06640
|
|
This bypasses the allow_insert check (which is redundant for copying since
we're mirroring an existing node structure that must be valid) and does
not cause an extra allocation for new declaration nodes. Overall results
in 15% faster copying,
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1036 99668b35-9821-0410-8761-19e4c4f06640
|
|
Moving nodes results in node order being different from order of allocated
names/values; since move is O(1) we can't mark the moved nodes in a
subtree so we have to disable the optimization for the entire document.
Similarly, if a node is composed of multiple buffers, comparing nodes in
different buffers does not result in meaningful order.
Since we value correctness over performance, mark the entire document in
these cases to disable sorting optimization.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1034 99668b35-9821-0410-8761-19e4c4f06640
|
|
Now copying nodes or attributes does not copy names/values if the source
strings are in a document buffer. As a result, several nodes can now share
the same string in document buffer - to support this we 'taint' both
source and destination with a special 'shared' bit.
Tainting disables offset_debug() and fast-path document order comparison;
it also prevents strcpy_insitu from reusing the document buffer memory for
the copied node.
The downsides include slower XPath queries in some (rare) cases and
slightly higher memory consumption in some (rare) cases.
XPath queries can execute slower if a lot of old nodes were copied to new
nodes *and* a query only touches old nodes (so it used to benefit a lot
from fast comparison path) *and* a query produces unsorted node sets that
need to be sorted later (both are relatively rare).
Higher memory consumption is possible if a lot of nodes were copied and
all nodes (both new and old) have their contents modified 'in place' --
previously we could modify the old node in place and the new node required
one allocation on copy, and now both nodes have to have their data
allocated during modification. This should also be rare.
On the bright side, in a lot of cases copying of string data can be
avoided - this makes the copy much faster and the document now occupies
less memory. For example, some uses of append_buffer are now actually slower
compared to building up a document by copying a template from the same
document and modifying the copy slightly.
In one of the internal benchmarks copying is now 4x faster (the difference
can be more dramatic with more string contents and less markup).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1032 99668b35-9821-0410-8761-19e4c4f06640
|
|
This is required to make it possible to use a pointer to one of the
buffers with the document data in nodes but keep offset_debug and (more
importantly) XPath document order comparison optimization working.
The change increases memory page alignment to 64 bytes (so requires +32
bytes for every page allocation, which should not be a problem - even with
non-default 4k pages this is <1% extra cost, with default 32k pages the
overhead is 0.1%)
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1031 99668b35-9821-0410-8761-19e4c4f06640
|
|
Since xml_node/attribute are pointer wrappers it's cheaper to pass them by
value. This makes XPath evaluation 4% faster and node printing 2% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1029 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes node copying 6% faster, prevents it from ever running out of
stack space and makes the profiling results more actionable for profilers
that can't merge information from recursive calls.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1027 99668b35-9821-0410-8761-19e4c4f06640
|
|
Renames write to write_string and write_buffer to make it easier to
distinguish between them in profiling runs and commit messages...
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1025 99668b35-9821-0410-8761-19e4c4f06640
|
|
Make it easier for the compiler to generate good code by loading bufsize
into a local once and returning new offset from flush(). This results in
7% performance gain.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1024 99668b35-9821-0410-8761-19e4c4f06640
|
|
Instead of computing the length and doing memcpy we now copy the head of
the string into the buffer (like strcpy) and then use memcpy for tail if
necessary. This results in 10-15% speedup for writing typical documents with
a mix of short and long strings.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1023 99668b35-9821-0410-8761-19e4c4f06640
|
|
//name means /descendant-or-self::node()/child::name, but we frequently
can replace it with /descendant::name. This means we do not have to build
up a temporary node set with all descendants that can lead to 3x speedups.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1021 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1019 99668b35-9821-0410-8761-19e4c4f06640
|
|
We now precompute indent length and have a fast path for lengths 0..4 that
avoids calling memcpy in a tight loop. This makes node output 20-30%
faster if indentation is enabled.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1018 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes node output 3% faster, prevents it from ever running out of
stack space and makes the profiling results more actionable for profilers
that can't merge information from recursive calls.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1014 99668b35-9821-0410-8761-19e4c4f06640
|
|
Fixes C4458: declaration of 'var' hides class member
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1011 99668b35-9821-0410-8761-19e4c4f06640
|
|
Use a special macro that unrolls the loop body and uses static branch prediction
to improve code generation.
This increases performance across all data sets from benchmark; clang x64 is 10%-40%
faster, clang x86 is 5%-20% faster, msvc is 5%-10% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1008 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes it easier to optimize strconv. For consistency move all definitions of parser-internal macros to one place.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1007 99668b35-9821-0410-8761-19e4c4f06640
|
|
Also add it to #undef list at the end to avoid conflicts
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1006 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1005 99668b35-9821-0410-8761-19e4c4f06640
|
|
The operations itself are O(1) since they just rearrange pointers.
However, the validation step is O(logN) due to a sanity check to prevent recursive trees.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1002 99668b35-9821-0410-8761-19e4c4f06640
|
|
This should make moving implementation easier.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1001 99668b35-9821-0410-8761-19e4c4f06640
|
|
When allocating new pages, make sure that the page has at least 1/4 of the
base page size free. This makes sure that we can do small allocations after
big allocations (i.e. huge node lists) without doing a heap alloc.
This is important because XPath stack code always reclaims extra pages after
evaluating sub-expressions, so allocating a small chunk of memory and then
rolling the state back is a common case (filtering a node list using a
predicate usually does this).
A better solution involves smarter allocation rollback strategy, but the
implemented solution is simple and practical.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@999 99668b35-9821-0410-8761-19e4c4f06640
|
|
Exposing true mutable iterators allows the user to violate sorting order
contract. However, some generic algorithms (i.e. Boost ForEach) require
iterator methods to be present.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@998 99668b35-9821-0410-8761-19e4c4f06640
|
|
qmake.
Qmake treats all files that are #include-d as header files, even if the #include is
guarded by an #ifdef. It looks like the only solution that allows for transparent
header-only support based on preprocessor define involves moving the actual source
into a separate header file and including this file in pugixml.cpp.
Let's not do it yet.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@990 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@987 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@985 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@983 99668b35-9821-0410-8761-19e4c4f06640
|
|
Introduce a notable behavior change in default parsing mode: documents without a
document element node are now considered invalid. This is technically a breaking change,
however the amount of documents it affects is very small, all parsed data still persists,
and lack of this check results in very confusing behavior in a number of cases.
In order to be able to parse documents without an element node, a fragment parsing flag is
introduced.
Parsing a buffer in fragment mode treats the buffer as a fragment of a valid XML.
As a consequence, top-level PCDATA is added to the tree; additionally, there are no
restrictions on the number of nodes -- so documents without a document element are considered
valid.
Due to the way parsing works internally, load_buffer_inplace occasionally can not preserve
the document contents if it's parsed in a fragment mode. While unfortunate, this problem is
fundamental; since the use case is relatively obscure, hopefully documenting this shortcoming
will be enough.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@980 99668b35-9821-0410-8761-19e4c4f06640
|
|
Parsing used to work on a non null-terminated buffer, inserting a fake null terminator to increase performance.
This makes it impossible to implement fragment parsing that preserves PCDATA contents (as witnessed by some
tests for boundary conditions that actually depended on this behavior).
Since almost all uses result in us allocating an internal buffer anyway, the new policy is to make sure all buffers
that are allocated by pugixml are null-terminated - the only exception now is external calls to load_buffer_inplace
that don't trigger encoding conversion.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@977 99668b35-9821-0410-8761-19e4c4f06640
|
|
reduce overloading.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@975 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@973 99668b35-9821-0410-8761-19e4c4f06640
|
|
Add tentative changelog for 1.4 to the documentation.
Since Google Code no longer allows file upload, replace download links with GitHub release links.
git-svn-id: http://pugixml.googlecode.com/svn/trunk@968 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: http://pugixml.googlecode.com/svn/trunk@967 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: http://pugixml.googlecode.com/svn/trunk@965 99668b35-9821-0410-8761-19e4c4f06640
|
|
PUGIXML_HEADER_ONLY anywhere now, source is automatically included
git-svn-id: http://pugixml.googlecode.com/svn/trunk@964 99668b35-9821-0410-8761-19e4c4f06640
|
|
(autodetection is not implemented yet)
git-svn-id: http://pugixml.googlecode.com/svn/trunk@962 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: http://pugixml.googlecode.com/svn/trunk@961 99668b35-9821-0410-8761-19e4c4f06640
|
|
xml_node_iterator in terms of internals
git-svn-id: http://pugixml.googlecode.com/svn/trunk@960 99668b35-9821-0410-8761-19e4c4f06640
|
|
as a compile-time constant expression
git-svn-id: http://pugixml.googlecode.com/svn/trunk@959 99668b35-9821-0410-8761-19e4c4f06640
|
